Kichler 28"w Lacey 5-Light Semi Flush Ceiling Light Antique Pewter with White Organza and Satin-Etched Glass Shade

What is a Semi-Flush Mount?

A semi-flush light fixture is mounted to a ceiling. While part of the fixture sits flush to the ceiling, usually there is a gap between the ceiling and the light shade. A close-to-ceiling fixture can work well as a central light fixture, ideal in smaller rooms and hallways where there is less head-room. A semi-flush fixture tends to be more decorative than a fully-flush light fixure. These lights are hardwired and must be installed electrically, operated by a wall switch. They produce good ambient light, although a larger room may need more than one.

Semi-Flush Benefits

• More decorative than a flush mount.
• Close to the ceiling, leaves head-room.
• Allows for fairly bright overhead lighting.
• Single installation with multiple bulbs.
• Ideal for small, medium or large rooms.
• A big upgrade over 'boob lights'.
• Better-quality than 'builder lights'.
• A less-expensive alternative to chandeliers.
• Less formal than a larger light fixture.

Ambient Background Lighting

Fixtures closely attached to a ceiling tend to produce more ambient background light. They might be used to support a more central light fixture or as a less elaborate central light. They can produce strong light near to where they are placed. A close-to-ceiling light can flood a room with ambient light.

For which rooms?

A semi-flush may need a little more ceiling height than a flush mount, but is often useful in a living or family room, bedrooms, a kitchen, a home office or in a basement. They also work well in hallways, bathrooms and smaller rooms.

Placement/Layering

Being close-to-the-ceiling, these lights will radiate light outward and downward. They can light a large area, but you should also consider wall lights or lamps to fill out the edges or corners of the room, and to provide softer light for more relaxed situations.

Mounts to the Ceiling

Attaches to a flat ceiling. Could potentially be mounted to a sloped/vaulted ceiling. The flush-mount canopy area hides the electrical installation.

Installed by an Electrician

An electrician or person with electrical installation knowledge will need to permanently wire the semi-flush fixture into the building's electrical supply.