>>> Return to "Article Page" <<<

How to Install a chandelier

Install your Light right, the first time with these tips

Tips for your next home remodeling project. Converting to a much brighter six light chandelier is quick and easy if you follow these steps

1. For this project we will need a Screwdriver and Wire Cutters.
2. Go to the Breaker Box and turn off the power and lights. Make Sure light is off by checking the light switch.
3. Once the power is off carefully remove the old light fixture and mounting hardware. Attach the bracket to the electrical box
4. When Assembling your light fixture, avoid laying it on the ground as this can cause unnecessary scratches and dents, instead Assemble the fixture on its cardboard box.
5. Hang the fixture before putting the glass on as this will make it easier to hang the fixture, you might want some additional help while you hang the fixture. Wait until the very end to install any finials or decorative accents to reduce the chance of dents and scratches
6. Once you determine where you want the fixture to hang, feed the wire through the bracket. Cut off any excess wire. Strip off both ends of the wire. Connect the white wire to the white wire and twist them together with a wire connector. Do the same for the black wire and the same for the copper brown wire. (Caution: Don’t cut the wires until you are POSITIVE you have the right height. Chandeliers should hang about 30 inches above your table.)
7. Hide the wires and attached the canopy. Put the glass on and then the light bulbs.
8. Turn the power back in at the breaker box, Then turn the light back on and enjoy
9. If you run into any problems in the installation please contact your license electrician, today we installed the six light chandeliers from the Golden Origins collection

Be sure to check out all Golden Lighting Chandeliers at www.lampsusa.com


>>> Return to "Article Page" <<<