|
Monte Carlo wall mounted remote control transmitter and receiver unit. Works with most Monte Carlo ceiling fans (check fan for compatibility).
- Includes White and Almond faceplates and trim plates
- Allows operation of fan at three speeds: High, Medium and Low
- Fan Off button switches fan off
- Reverse button reverses direction of fan rotation
- Light Dimmer button provides light dimming functionality for `down-light-only` fans. For fans with an up-light see WT150
- Requires 1 x 12-volt battery (included)
- Battery can be replaced with e.g. Duracell MN21, Eveready A23, GP23A or similar 12-volt
- Includes a receiver unit that you must install inside the fan itself (basic connectivity needed). Please check that your Monte Carlo fan is compatible with this remote/receiver before purchasing
- Receiver unit is able to receive signals for fan speeds, reverse, light dimming and fan shut-off, transmitted from this remote or other Monte Carlo remotes/controls
- If using this wall control with the RMWH-RENC receiver unit, the Reverse button will not function
- To purchase this wall control without the receiver unit, see WT100
|