Monte Carlo hand-held remote control transmitter and receiver unit. Works with most Monte Carlo ceiling fans (check fan for compatibility).

• White Finish
• Allows operation of fan at three speeds: 3=High, 2=Medium and 1=Low
• `0` button switches fan off
• Remote does not include a reverse button and the receiver cannot receive `reverse` signals from other remotes/controls
• Light button provides light dimming functionality for `down-light-only` fans. For fans with an up-light see HT150-WH
• Requires 1 x standard 9-volt battery (included)
• Includes a receiver unit that you must install inside the fan itself (basic wiring needed). Please check that your Monte Carlo fan is compatible with this remote/receiver before purchasing
• Receiver unit is able to receive signals for fan speeds, light dimming and fan shut-off (not reverse), transmitted from this remote or other Monte Carlo remotes/controls
• If using this remote with a different remote/receiver unit, the reverse functionality will not be controllable